FOR HOME PAGE click - - HOME

***

WOODBLOCKS

SCROLL DOWN

***


PLEASE EMAIL US WITH YOUR ORDER OR ENQUIRY.


bakeliteproducts@gmail.com

WE WILL RESPOND WITH A QUOTE INCLUDING POSTAGE
AND PROVIDE PAYMENT OPTIONS.

***

ELECTRICAL COVER STRIP



SMALL

CODE - - COVER-STRIP31
$5.35/m
We can only send coverstrip in 1 metre lengths through Australia Post.

TRADITIONAL TIMBER COVER STRIP
SMALL ( CONDUIT )
Fastened with small nails from the top down near sides.


Width = 31mm ( 1-1/4" )
Groove Width = 16mm ( 3/4" )
Groove Depth = 10mm ( 3/8" )



MEDIUM

CODE - - COVER-STRIP36
$5.35/m
We can only send coverstrip in 1 metre lengths through Australia Post.

TRADITIONAL TIMBER COVER STRIP
MEDIUM ( CONDUIT )
Fastened with small nails from the top down near sides.


Width = 36mm ( 1-7/16" )
Groove Width = 24mm ( 7/8" )
Groove Depth = 10mm ( 3/8" )

***



PLAIN RE-CYCLED PINE BLOCKS
or

STAINED & SHELLACED RE-CYCLED PINE BLOCKS


Shellac will wear naturally unlike a plastic finish which will chip and scratch with wear.
( Particle board or MDF board is NOT used )

We have been making these for 25 years.
Each block is made by hand, so together with the hand shellaced finish ( french polished)
they make a very authentic product
.


RECTANGULAR WOODBLOCKS


Note that the profile mould
comes in
from the edge on the
top surface by approx 8mm ( 5/16").

PL = PLAIN ie. raw timber

ST = STAINED AND SHELLACED
Shellac is a natural, non-synthetic finish.
(It can be lightly sanded and undercoated if desired).

SINGLE - - - -90 x 90 mm (3-1/2" x 3-1/2")
CODE - 331-90PL- - - - - - - - plain 10. 90
CODE - 331-90ST - - - - - -stained --- 12. 30

2GANG - - - - - - -90 x 150 mm (3-1/2" x 6")
CODE - 332-90PL- - - - - - - - -plain 12. 80
CODE - 332-90ST - - - - - stained --- 14. 20

3GANG - - - - -90 x 225 mm (3-1/2" x 8-3/4")
CODE - 333-90 PL- - - - - - - - plain 13. 90
CODE - 333-90ST- - - - - --stained --- 15. 50

4GANG long - -90 x 280 mm (3-1/2" x 11")
CODE - 334-90PL- - - - - - - - -plain 15. 00
CODE - 334-90ST - - - - - stained --- 16. 70

4GANG square (quad)- - - - -150 x150 mm (6" x 6")
CODE - 335-150PL- - - - - - - - plain 15. 00
CODE - 335-150ST - - - - - stained --- 16. 70

6 GANG - - - 150 x 225 mm (6" x 4-7/8")
CODE - 336-150PL- - - - - - - --plain 26. 80
CODE - 336-150ST - - - - --stained --- 27. 80


NARROW RANGE
The lengths are generally the same but the
width is 70mm wide instead of 90mm wide

used on architraves or tight situations

( lengths are the same )

SINGLE - - 70 x 70 mm (2-3/4" x 2-3/4")
CODE - 331-70PL- - - - - - - - -plain 10. 90
CODE - 331-70ST - - - - - -stained --- 12. 30

2 GANG - - - 70 x 150 mm (3-1/2" x 6")
CODE - 332-70PL- - - - - - - - - plain 12. 80
CODE - 332-70ST - - - - - -stained --- 14. 30

3 GANG - - 70 x 225 mm (3-1/2" x 4-7/8")
CODE - 333-70 L- - - - - - - - -plain 13. 90
CODE - 333-70ST- - - - - --stained --- 15. 50

4 GANG long - -70 x 285 mm (3-1/2" x 7-1/4")
CODE - 334-70PL- - - - - - - - - plain 15. 00
CODE - 334-70ST - - - - - -stained --- 16. 70

4GANG square (quad) - - - - -150 x150 mm (6" x 6")
CODE - 335-150PL- - - - - - - - plain 15. 00
CODE - 335-150ST - - - - - stained --- 16. 70

6 GANG - - - 150 x 225 mm (6" x 4-7/8")
CODE - 336-150PL- - - - - - - --plain 26. 80
CODE - 336-150ST - - - - --stained --- 27. 80


ROUND
WOODBLOCKS

Note that the profile mould
comes in
from the edge on the
top surface by approx 15mm ( 5/8") .

eg. a 90mm block has a base diameter of 90mm and a top face diameter of 75mm.

PL = PLAIN ie. raw timber

ST = STAINED AND SHELLACED
Shellac is a natural, non-synthetic finish.
(It can be lightly sanded and undercoated if desired).


CODE - 339-70PL - - - - -70 mm (2-3/4")- - --- - plain 9. 30
CODE - 339-70ST - - - - -70 mm (2-3/4") - stained --- 9. 80
top surface diameter = 58mm (2-1/4")

CODE - 339-80ST - - - - - 80 mm (3-1/4")- - stained --- 9. 95

CODE - 339-90PL - - - - 90 mm (3-1/2")- - --- - plain 10. 30
CODE - 339-90ST- -- - --90 mm (3-1/2") - - -stained 10. 80

CODE - 339-100ST - - - 100mm (4" ) - - -- - ---stained 12. 80

CODE - 339-110ST - - - 110mm- ( 4-1/4" ) - --stained 12. 80

CODE - 339-120ST - - - 120mm ( 4-1/2" ) - - -stained 13. 40

CODE -339-130ST- - -130mm (5-1/8")- - -stained 13. 40

CODE - 339-140ST - - - 140mm ( 5-1/2" ) - - - stained 17. 80

CODE - 339-160ST - - - 160 mm ( 6-1/4") - - - -stained 19. 80

CODE - 339-180ST - - - 180 mm ( 7-1/8") - - - stained 22. 80

CODE - 339 - 200ST - - - 200mm (8") - - - 26. 80

CODE. - 339-240ST - - - 240mm (9-3/8") - - - - stained 32. 80

CODE - 339-280PL - - - 280 mm ( 11 ") - - - - - - - plain 35. 80

***


BLOCKS LIKE ABOVE THAT ARE CUT ON AN
ANGLE ON THE BACK TO COMPENSATE
FOR SLOPED CEILING OR WEATHERBOARDS

90mm size only - stained

CUT AT APPROX 15 Degrees


CODE - 339-90ST ANGLE - -- - --90 mm (3-1/2") - - -stained 16. 95

 

***


WE ALSO HAVE ROUND AND RECTANGULAR BLOCKS THAT ARE UNDRILLED ON THE FACE.

THESE ARE STAINED& SHELLACED, MAKING THEM SUITABLE FOR CONVERSION INTO BACKING BOARDS FOR COAT/BAG HOOKS OR HOUSE/CAR KEY BOARDS etc.

THESE BLOCKS HAVE BEEN HOLLOWED OUT ON THE UNDERSIDE.

(picture and price coming soon)

 


Note that the profile mould comes in from the edge by approx. 8mm ( 5/16") .

Example:- the 2502WI New BakeliteSwitch (shown above) of 50mm ( 2 ") diameter is best on an 80mm ( 3 1/4") round block.

Reason :- Because the profile mould comes in from the edge by approx 8mm ( 5/16") you subtract twice 8mm ( 5/16")
being 16mm (5/8")from 80mm(3-1/4") leaving a surface diameter of 64mm (2-5/8")

The switch is 14mm (5/8") smaller than the surface diameter of the top of the block giving a 7mm (5/16") space around the switch which is fine.
A 70mm 2-3/4" block can also be used in narrow spaces or a 90mm (3-1/2" ) if one wants a generous distance.
Needless to say, we can suggest which blocks are most suitable.

***


www. bakelite switch .com www. bakelite fittings .com www.bakelite products .com www.bakelite.com.au
WWW.AUTHENTICLIGHTINGANDHARDWARE.COM
woodblocks aged electrical woodblocks shellac woodblocks aged shellaced woodblocks
pattresses old style woodblocks pattresses
shop factory www. bakelite museum.com firm precinctwww.bakeliteswitch.com www.bakelitefittings.com www.bakeliteproducts.com www.bakelite.com.au

WWW.VICTORIANLIVING.COM.AU

ABN: 84 809 143 967

** SENDING WORLDWIDE **

For ordering :


PLEASE EMAIL US WITH YOUR
ORDER OR ENQUIRY.


bakeliteproducts@gmail.com

WE WILL RESPOND WITH A QUOTE
INCLUDING POSTAGE.

Our payment options are listed below.
Please do not make payment until you have
received a confirmation from us for your order.


***

PAYMENT OPTIONS BELOW

PAYPAL email is bakeliteproducts@gmail.com
***

DIRECT DEPOSIT bank details are :-
Bendigo Bank
BSB :- 633 000
ACCOUNT NUMBER :- 1 2 6 1 8 4 8 2 9
ACCOUNT HOLDERS : JGH Paas & J Barlow- Paas
(please provide a reference when making payment
for your order so we know who it is from
and brief description of goods that you have ordered)

OVERSEAS SWIFT NUMBER - - BENDAU3B

***

VISA or MASTERCARD
Please provide your phone number when ordering

and we can ring you for credit card details if you wish.
OR
Send your credit card details over a few emails.
Please include card numbers; expiry date
and CVV on back of card.

CHOOSE CAREFULLY AS THERE ARE NO REFUNDS

***

 

***

FOR HOME PAGE click - - HOME